HonestBindBY THE HONEST CHEMIST
Water-based binders that don’t compromise
A European-made resin line — low-VOC, APEO-free chemistries across eight sectors, from architectural coatings and construction to leather, floor care and road marking.
- WATER-BASED
- LOW-VOC
- APEO-FREE
- EU-MADE
RESIN SELECTOR
Answer four questions, get a shortlist
- Sector
- Function within sector
- What matters most
- Constraints
~60 SECONDS · NO SIGN-UP
SECTOR COVERAGE
Eight sectors, one binder line
THE RANGE MAP
Sectors × chemistries,
one view
The manufacturer’s selection table, redrawn for clarity. Every dot is a HonestBind grade family in production — pick a row and the selector narrows it to a shortlist.
- CORE RANGE · 2+ GRADES
- SELECTIVE · 1 GRADE
- NOT OFFERED
49 GRADES · 5 CHEMISTRY FAMILIES · EU-MADE
Open the selectorALL GRADES
The range
Organized the way formulators work — by sector and function. Every grade is produced in Europe and stocked for full-container delivery to the US. Datasheets on request.
49 grades
Pure acrylic
HonestBind A 1105
A 1105
Primer / fixative
Ultrafine pure-acrylic penetrating primer and fixative that consolidates chalky, absorbent mineral substrates before…
- SOLIDS
- 34 %
- TG
- 22 °C
- HARDNESS
- Medium
Pure acrylic
HonestBind A 1120
A 1120
Exterior / facade binder
Premium pure-acrylic facade binder with outstanding alkali and UV resistance for long-warranty exterior masonry paints.
- SOLIDS
- 46 %
- TG
- 16 °C
- HARDNESS
- Medium
Pure acrylic
HonestBind A 1135
A 1135
Exterior / facade binder
Elastomeric pure-acrylic binder for crack-bridging facade paints and flexible exterior systems on movement-prone…
- SOLIDS
- 55 %
- TG
- -22 °C
- HARDNESS
- Elastomeric
Pure acrylic
HonestBind A 1330
A 1330
Aggregate binder
Tacky, flexible pure-acrylic binder for stone carpet, resin-bound aggregate, and decorative gravel surfaces.
- SOLIDS
- 55 %
- TG
- -12 °C
- HARDNESS
- Soft
Pure acrylic
HonestBind A 1350
A 1350
Printed-concrete varnish
Hard, glossy pure-acrylic varnish binder for printed and stamped concrete sealing with strong dirt and water resistance.
- SOLIDS
- 42 %
- TG
- 46 °C
- HARDNESS
- Hard
Pure acrylic
HonestBind A 1380
A 1380
Microcement
Hard-balanced pure-acrylic polymer modifier for microcement, thin overlays, and polymer-modified cementitious finishes.
- SOLIDS
- 48 %
- TG
- 32 °C
- HARDNESS
- Medium
Pure acrylic
HonestBind A 1450
A 1450
Elastic membrane
Flagship elastomeric pure-acrylic for liquid-applied waterproofing membranes with very high elongation and recovery.
- SOLIDS
- 60 %
- TG
- -38 °C
- HARDNESS
- Elastomeric
Pure acrylic
HonestBind A 1460
A 1460
Elastic membrane
Elastomeric acrylic membrane binder tuned for lower surface tack and better dirt resistance on exposed roofs.
- SOLIDS
- 58 %
- TG
- -25 °C
- HARDNESS
- Elastomeric
Pure acrylic
HonestBind A 1610
A 1610
Tannin blocker
Cationic self-crosslinking acrylic tannin blocker that locks knots and extractive-rich woods under pale waterborne…
- SOLIDS
- 38 %
- TG
- 18 °C
- HARDNESS
- Medium
Pure acrylic
HonestBind A 1615
A 1615
Finish
Flexible self-crosslinking acrylic finish for exterior joinery that moves — windows, doors, and cladding.
- SOLIDS
- 40 %
- TG
- 18 °C
- HARDNESS
- Medium
Pure acrylic
HonestBind A 1620
A 1620
Finish
Self-crosslinking acrylic workhorse for clear and pigmented wood lacquers with fast hardness development and chemical…
- SOLIDS
- 42 %
- TG
- 36 °C
- HARDNESS
- Hard
Pure acrylic
HonestBind A 1630
A 1630
Finish
Hard self-crosslinking acrylic for furniture-grade lacquers with maximum block, print, and scratch resistance.
- SOLIDS
- 44 %
- TG
- 52 °C
- HARDNESS
- Hard
Pure acrylic
HonestBind A 1680
A 1680
2K system
Hydroxylated acrylic for two-component isocyanate-crosslinked wood coatings approaching solvent 2K PU performance.
- SOLIDS
- 41 %
- TG
- 42 °C
- HARDNESS
- Hard
Pure acrylic
HonestBind A 1710
A 1710
Pigment printing binder
Self-crosslinking acrylic pigment-printing binder with soft hand and wash-fastness beyond 40 domestic cycles.
- SOLIDS
- 40 %
- TG
- -32 °C
- HARDNESS
- Elastomeric
Pure acrylic
HonestBind A 1715
A 1715
Pigment printing binder
Ultra-soft self-crosslinking printing binder for fashion prints where hand feel is the buying criterion.
- SOLIDS
- 38 %
- TG
- -42 °C
- HARDNESS
- Elastomeric
Pure acrylic
HonestBind A 1730
A 1730
Finish
Soft self-crosslinking acrylic finish for handle modification, pigment padding, and embossed textile effects.
- SOLIDS
- 35 %
- TG
- -28 °C
- HARDNESS
- Elastomeric
Pure acrylic
HonestBind A 1750
A 1750
Table adhesive
Permanently tacky acrylic table adhesive holding fabric flat through repeat printing passes, water-washable and…
- SOLIDS
- 45 %
- TG
- -50 °C
- HARDNESS
- Elastomeric
Pure acrylic
HonestBind A 1810
A 1810
Traffic paint binder
Premium pure-acrylic traffic binder for airfields and high-spec highway markings with maximum UV and color retention.
- SOLIDS
- 50 %
- TG
- 46 °C
- HARDNESS
- Hard
Pure acrylic
HonestBind A 1910
A 1910
Leather base coat
Very soft self-crosslinking acrylic base coat for leather finishing with deep embossing retention and natural break.
- SOLIDS
- 35 %
- TG
- -35 °C
- HARDNESS
- Elastomeric
Pure acrylic
HonestBind A 1920
A 1920
Leather top coat
Self-crosslinking acrylic top coat for leather with high alcohol, rub, and blocking resistance at a natural gloss level.
- SOLIDS
- 32 %
- TG
- 30 °C
- HARDNESS
- Medium
Pure acrylic
HonestBind A 1950
A 1950
Footwear adhesive
High-tack elastomeric acrylic adhesive for footwear assembly — sock linings, insole boards, and component bonding.
- SOLIDS
- 50 %
- TG
- -45 °C
- HARDNESS
- Elastomeric
Pure acrylic
HonestBind A 8010
A 8010
Self-shine polymer
Zinc-free self-shine floor polymer with high gloss, dirt resistance, and detergent-strippable maintenance behavior.
- SOLIDS
- 38 %
- TG
- 58 °C
- HARDNESS
- Hard
Pure acrylic
HonestBind A 8020
A 8020
Self-shine polymer
Zinc-free self-shine polymer tuned for maximum gloss build and easy spray-buff maintenance in prestige interiors.
- SOLIDS
- 36 %
- TG
- 48 °C
- HARDNESS
- Hard
Pure acrylic
HonestBind A 8030
A 8030
Self-shine polymer
Hardest zinc-free self-shine polymer in the range, holding gloss under aggressive daily detergent scrubbing.
- SOLIDS
- 40 %
- TG
- 66 °C
- HARDNESS
- Hard
Pure acrylic
HonestBind A 9110
A 9110
Agrochemical binder
EPA 40 CFR 180 compliant acrylic film-former and sticker improving rainfastness of agrochemical spray deposits.
- SOLIDS
- 45 %
- TG
- -5 °C
- HARDNESS
- Soft
Pure acrylic
HonestBind A 9120
A 9120
Agrochemical binder
Soft, high-rainfastness acrylic sticker-extender for seed treatments and long-persistence agrochemical coatings.
- SOLIDS
- 50 %
- TG
- -25 °C
- HARDNESS
- Elastomeric
Pure acrylic
HonestBind A 9210
A 9210
Anti-graffiti
Hard acrylic binder for semi-permanent anti-graffiti coatings with strong solvent resistance and cleanable gloss…
- SOLIDS
- 40 %
- TG
- 52 °C
- HARDNESS
- Hard
Polyacrylate salt
HonestBind PA 6110
PA 6110
Detergent dispersant
Sodium polyacrylate dispersant for powder and liquid detergents, controlling incrustation and carrying calcium in hard…
Polyacrylate salt
HonestBind PA 6120
PA 6120
Detergent dispersant
Anti-redeposition polyacrylate copolymer keeping suspended soil off fabrics through the rinse in modern low-phosphate…
Polyacrylate salt
HonestBind PA 6210
PA 6210
Ceramic process additive
Polyacrylate dispersant and temporary binder for ceramic slips, glazes, and spray-dried body preparation.
Polyacrylate salt
HonestBind PA 6310
PA 6310
Thickener
Polyacrylate synthetic thickener for pigment-print pastes with sharp shear response and electrolyte tolerance.
PVAc homopolymer
HonestBind PV 4110
PV 4110
Pigmented filler
PVAc homopolymer binder for pigmented wood fillers and putties with fast dry, easy sanding, and low odor.
- SOLIDS
- 52 %
- TG
- 34 °C
- HARDNESS
- Medium
Styrene-acrylic
HonestBind SA 2105
SA 2105
Primer / fixative
Deep-penetrating styrene-acrylic fixative that consolidates absorbent mineral substrates and dusty screeds before…
- SOLIDS
- 30 %
- TG
- 28 °C
- HARDNESS
- Medium
Styrene-acrylic
HonestBind SA 2140
SA 2140
Exterior / facade binder
Styrene-acrylic facade workhorse combining early water resistance with a crisp, dirt-shedding film at a competitive…
- SOLIDS
- 50 %
- TG
- 21 °C
- HARDNESS
- Medium
Styrene-acrylic
HonestBind SA 2160
SA 2160
Plaster & texture binder
High-binding styrene-acrylic for decorative plasters and texture coatings that stay tough at very high filler loads.
- SOLIDS
- 53 %
- TG
- 20 °C
- HARDNESS
- Medium
Styrene-acrylic
HonestBind SA 2450
SA 2450
Elastic membrane
Economical styrene-acrylic membrane binder for under-tile waterproofing and protected elastomeric build-ups.
- SOLIDS
- 55 %
- TG
- -20 °C
- HARDNESS
- Elastomeric
Styrene-acrylic
HonestBind SA 2510
SA 2510
Soil stabilization
Penetrating styrene-acrylic binder for dust control, soil stabilization, and temporary erosion protection of aggregates.
- SOLIDS
- 45 %
- TG
- 5 °C
- HARDNESS
- Soft
Styrene-acrylic
HonestBind SA 2710
SA 2710
Pigment printing binder
Economical styrene-acrylic printing binder for dark grounds and workwear where a drier hand is acceptable.
- SOLIDS
- 45 %
- TG
- -18 °C
- HARDNESS
- Elastomeric
Styrene-acrylic
HonestBind SA 2810
SA 2810
Traffic paint binder
Fast-dry styrene-acrylic traffic-paint binder with quick-set chemistry for waterborne road markings that reopen lanes…
- SOLIDS
- 50 %
- TG
- 44 °C
- HARDNESS
- Hard
Styrene-acrylic
HonestBind SA 2820
SA 2820
Traffic paint binder
Fastest-setting traffic binder in the range for humid-climate striping and short lane-closure windows.
- SOLIDS
- 51 %
- TG
- 48 °C
- HARDNESS
- Hard
Vinyl-acrylic
HonestBind VA 3410
VA 3410
Interior paint binder
Vinyl-acrylic interior binder delivering high scrub resistance and hiding power in low-odor, low-VOC wall paints.
- SOLIDS
- 50 %
- TG
- 12 °C
- HARDNESS
- Medium
Vinyl-acrylic
HonestBind VA 3520
VA 3520
Concrete bonding
Permanently tacky vinyl-acrylic bonding agent for concrete-to-concrete and mortar adhesion, gauging, and slurry primers.
- SOLIDS
- 55 %
- TG
- -8 °C
- HARDNESS
- Soft
Vinyl-acrylic
HonestBind VA 3710
VA 3710
Nonwoven binder
Self-crosslinking vinyl-acrylic nonwoven binder with food-contact compliance for wipes, filtration, and packaging…
- SOLIDS
- 50 %
- TG
- 6 °C
- HARDNESS
- Soft
Vinyl-VeoVa
HonestBind VV 5210
VV 5210
Exterior / facade binder
Vinyl-VeoVa exterior binder with excellent alkali resistance and vapor permeability for breathable facade systems on…
- SOLIDS
- 50 %
- TG
- 18 °C
- HARDNESS
- Medium
Vinyl-VeoVa
HonestBind VV 5220
VV 5220
Exterior / facade binder
High-binding vinyl-VeoVa grade for highly filled exterior renders and roll-on plasters that must stay water resistant…
- SOLIDS
- 52 %
- TG
- 24 °C
- HARDNESS
- Medium
PE wax emulsion
HonestBind WX 7110
WX 7110
Wax emulsion
Fine-particle PE wax emulsion additive for slip control, mar resistance, and black-heel-mark protection in polishes…
PE wax emulsion
HonestBind WX 7115
WX 7115
Wax emulsion
Oxidized PE wax emulsion with food-contact compliance for produce coatings, packaging varnishes, and polish systems.
Montana wax emulsion
HonestBind WX 7120
WX 7120
Wax emulsion
Montana wax emulsion for repolishable depth, hardness, and water repellency in traditional and hybrid floor polishes.
Carnauba wax emulsion
HonestBind WX 7130
WX 7130
Wax emulsion
Carnauba wax emulsion, food-contact compliant, for premium buffable gloss in polishes, fruit coatings, and release…
WHY WATER-BASED
Built for the regulations your customers are already asking about
Every HonestBind grade is formulated water-based from the ground up — not a solvent system reworked. That means low formulated VOC, APEO-free stabilization, and documentation ready for eco-label submissions.
Request a datasheet< 50 g/L
Formulated VOC achievable across the line
100 %
APEO-free stabilization systems
49 grades
Across eight sectors plus specials
EU-made
Produced in Europe, stocked in the US
Sample before you scale
Lab samples ship from US stock. Container pricing on request.